IP transcoding unit: two subnets, two IP addresses, tagged

Applies to: SBC 3.1, 3.3

Perequisites

	Perequisites
*ProSBC (or Tsbc) Host Network device name Network device role Network Config ------------------- ------------------- ------------------- mgmt0 mgmt Untagged wan0 LAN/WAN Tagged 1650 lan0 LAN/WAN Tagged 1651 trans0 LAN/WAN Tagged 752 trans1 LAN/WAN Tagged 753 ctrl0 ctrl0 Tagged 750 ctrl1 ctrl1 Tagged 751 NOTE: The 'Network device names' for transcoding must be trans0 and trans1 *Hardware Unit - TB002177 is the TSBC-HW-TRANS unit in the below setup Network device name Network device role Network Config ------------------- ------------------- ------------------- voip0 LAN/WAN Tagged 752 voip1 LAN/WAN Tagged 753 eth0 ctrl0 Untagged PVID 750 ** eth1 ctrl1 Untagged PVID 751 ** NOTE: On the network switch, the control ports on the Hardware unit need to be configure with Link Type: Access
	Configure IP Network for wan0	Configure IP Network for lan0	Configure IP Network for trans0	Configure IP Network for trans1
*Create vp_wan0 virtual port: **Name: vp_wan0 **Ethernet Ports: wan0 **VLAN name: vlan_1650 **VLAN id: 1650 *Create wan0 IP Address: **Name: wan0 **Service to use: RTP, SIP **Host VLAN: vp_wan0:vlan_1650 **IP address: 192.168.150.1 **Netmask: 255.255.255.0	*Create vp_lan0 virtual port: **Name: vp_lan0 **Ethernet Ports: lan0 **VLAN name: vlan_1651 **VLAN id: 1651 *Create lan0 IP Address: **Name: lan0 **Service to use: RTP, SIP **Host VLAN: vp_lan0:vlan_1651 **IP address: 192.168.151.1 **Netmask: 255.255.255.0	*Create vp_trans0 virtual port: **Name: vp_trans0 **Ethernet Ports: trans0 **VLAN name: vlan_752 **VLAN id: 752 *Create trans0 IP Address: **Name: trans0 **Service to use: RTP **Host VLAN: vp_trans0:vlan_752 **IP address: 192.168.152.1 **Netmask: 255.255.255.0	*Create vp_trans1 virtual port: **Name: vp_trans1 **Ethernet Ports: trans1 **VLAN name: vlan_753 **VLAN id: 753 *Create trans1 IP Address: **Name: trans1 **Service to use: RTP **Host VLAN: vp_trans1:vlan_753 **IP address: 192.168.153.1 **Netmask: 255.255.255.0
Add transcoding unit
*Show transcoding unit *Add TB002177 transcoding unit == Transcoding unit network configuration ==		Configure IP Network for voip0	Configure IP Network for voip1
*Modify voip0 virtual port: **Name: voip0 **Untagged: unselect **VLAN id: 752 *Modify voip0 IP Address: **Interface Name: voip0 **Service to use: RTP **Virtual port: TB002177:voip0 **IP address: 192.168.152.10 **Netmask: 255.255.255.0	*Modify voip1 virtual port: **Name: voip1 **Untagged: unselect **VLAN id: 753 *Modify voip1 IP Address: **Interface Name: voip1 **Service to use: RTP **Virtual port: TB002177:voip1 **IP address: 192.168.153.10 **Netmask: 255.255.255.0
Configure SIP
*Configure SIP ** For WAN0 ***RTP port ranges parameters: ****Name: pr_wan0 ****IP Interface: vlan_1650:wan0 ****RTP Port min: 20000 ****RTP Port max: 40000 ***SIP transport server parameters: ****Name: ts_wan0 ****Port: 5060 ****IP Interface: vlan_1650:wan0 ***SIP NAP parameters: ****Name: nap_sip_wan0 ****Proxy Address: 192.168.150.10 ****Port Range: vlan_1650:wan0:pr_wan0:20000-40000 ****SIP Transport Servers: ts_wan0 ** For LAN0 ***RTP port ranges parameters: ****Name: pr_lan0 ****IP Interface: vlan_1651:lan0 ****RTP Port min: 20000 ****RTP Port max: 40000 ***SIP transport server parameters: ****Name: ts_lan0 ****Port: 5060 ****IP Interface: vlan_1651:lan0 ***SIP NAP parameters: ****Name: nap_sip_lan0 ****Proxy Address: 192.168.151.10 ****Port Range: vlan_1651:lan0:pr_lan0:20000-40000 ****SIP Transport Servers: ts_lan0