Two tagged VLAN, four IP addresses, SIP/RTP on separate IP
Applies to: Tmedia 2.8, 2.9, 2.10, 3.0, 3.2
Two tagged VLAN, Four IP Addresses, all through VoIP ports, SIP/RTP on separate IP
Vlan 100 uses tagged bonded over VOIP0 and VOIP1 ports *Create Virtual Port *Create IP Address
Vlan 200 uses tagged bonded over VOIP0 and VOIP1 ports *Create Virtual Port *Create IP Address
Configure SIP
Configure SIGTRAN
Configure H.248
Configure RADIUS
*Configure SIP **IP range parameters: ***Name: PORT_RANGE_VOIP ***IP Interface: VOIP_ADDRESS ***Minimum Port: 20000 ***Maximum Port: 30000 **SIP transport server parameters: ***Port: 5060 ***IP Interface: VOIP_ADDRESS **SIP NAP parameters: ***Proxy Address: 10.0.3.10 ***Port Range: PORT_RANGE_VOIP
*When you Configure H.248, set the following: **Local IP Address and Public IP Address: 10.0.4.20 [Public IP or NAT public IP]
*When you Configure RADIUS, set the following: **Source IP interface: RADIUS_100 **Radius -> Radius Server **Public IP Address: Empty
Last updated
Was this helpful?

