Separated traffic, H.248, Sigtran, RTP, four IPs, all through VoIP ports

Applies to: Tmedia 2.8, 2.9, 2.10, 3.0, 3.2

Four VLAN: tagged VLAN 100 for management, VLAN 200 for Sigtran, VLAN 300 RTP, VLAN 400 for H.248, all through VoIP ports

UseCase SeparatedTrafficH248SigtranRTPFourIPsallthroughVoip ports 0

	Configure IP Network A	Configure IP Network B	Configure IP Network C	Configure IP Network D
Vlan 100 uses tagged bonded over VOIP0 and VOIP1 ports *Create Virtual Port *Create IP Address	Vlan 200 use tagged bonded over VOIP0 and VOIP1 ports *Create Virtual Port *Create IP Address	Vlan 300 uses tagged bonded over VOIP0 and VOIP1 ports *Create Virtual Port *Create IP Address	Vlan 400 uses tagged bonded over VOIP0 and VOIP1 ports *Create Virtual Port *Create IP Address
Configure RTP	Configure SIGTRAN	Configure H.248
*Creating an IP Port Range **IP range parameters: ***Name: PORT_RANGE_VOIP ***IP Interface: Boned to RTP port range ***Minimum Port: 20000 ***Maximum Port: 30000	*Configure SIGTRAN	*When you Configure H.248, set the following: **Local IP Address and Public IP Address: 192.168.4.x/24 [Public IP or NAT public IP]