> For the complete documentation index, see [llms.txt](https://prosbcdocs.telcobridges.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://prosbcdocs.telcobridges.com/tmedia-documentation/use-cases/ip-transcoding-unit-configuration-use-case-two-subnet-two-ip-addresses-tagged.md). # IP Transcoding Unit Configuration Use Case:Two subnet, Two IP Addresses, tagged > **Applies to:** SBC 3.1, 3.3 ### Perequisites | | Perequisites | | | | | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ------------------------------- | | \*ProSBC (or Tsbc) Host Network device name Network device role Network Config ------------------- ------------------- ------------------- mgmt0 mgmt Untagged wan0 LAN/WAN Tagged 1650 lan0 LAN/WAN Tagged 1651 trans0 LAN/WAN Tagged 752 trans1 LAN/WAN Tagged 753 ctrl0 ctrl0 Tagged 750 ctrl1 ctrl1 Tagged 751 **NOTE:** The 'Network device names' for transcoding must be trans0 and trans1 \*Hardware Unit - TB002177 is the TSBC-HW-TRANS unit in the below setup Network device name Network device role Network Config ------------------- ------------------- ------------------- voip0 LAN/WAN Tagged 752 voip1 LAN/WAN Tagged 753 eth0 ctrl0 Untagged PVID 750 \*\* eth1 ctrl1 Untagged PVID 751 \*\* **NOTE:** On the network switch, the control ports on the Hardware unit need to be configure with Link Type: Access | | | | | | | Configure IP Network for wan0 | Configure IP Network for lan0 | Configure IP Network for trans0 | Configure IP Network for trans1 | | \*Create [vp\_wan0 virtual port](https://github.com/telcobridges-main/tmedia-wiki/tree/main/tmedia/configuration/configuring-a-virtual-port/README.md): \*\***Name**: vp\_wan0 \*\***Ethernet Ports**: wan0 \*\***VLAN name**: vlan\_1650 \*\***VLAN id**: 1650 \*Create [wan0 IP Address](https://github.com/telcobridges-main/tmedia-wiki/tree/main/tmedia/configuration/configuring-ip-interfaces/README.md): \*\***Name**: wan0 \*\***Service to use**: RTP, SIP \*\***Host VLAN**: vp\_wan0:vlan\_1650 \*\***IP address**: 192.168.150.1 \*\***Netmask**: 255.255.255.0 | \*Create [vp\_lan0 virtual port](https://github.com/telcobridges-main/tmedia-wiki/tree/main/tmedia/configuration/configuring-a-virtual-port/README.md): \*\***Name**: vp\_lan0 \*\***Ethernet Ports**: lan0 \*\***VLAN name**: vlan\_1651 \*\***VLAN id**: 1651 \*Create [lan0 IP Address](https://github.com/telcobridges-main/tmedia-wiki/tree/main/tmedia/configuration/configuring-ip-interfaces/README.md): \*\***Name**: lan0 \*\***Service to use**: RTP, SIP \*\***Host VLAN**: vp\_lan0:vlan\_1651 \*\***IP address**: 192.168.151.1 \*\***Netmask**: 255.255.255.0 | \*Create [vp\_trans0 virtual port](https://github.com/telcobridges-main/tmedia-wiki/tree/main/tmedia/configuration/configuring-a-virtual-port/README.md): \*\***Name**: vp\_trans0 \*\***Ethernet Ports**: trans0 \*\***VLAN name**: vlan\_752 \*\***VLAN id**: 752 \*Create [trans0 IP Address](https://github.com/telcobridges-main/tmedia-wiki/tree/main/tmedia/configuration/configuring-ip-interfaces/README.md): \*\***Name**: trans0 \*\***Service to use**: RTP \*\***Host VLAN**: vp\_trans0:vlan\_752 \*\***IP address**: 192.168.152.1 \*\***Netmask**: 255.255.255.0 | \*Create [vp\_trans1 virtual port](https://github.com/telcobridges-main/tmedia-wiki/tree/main/tmedia/configuration/configuring-a-virtual-port/README.md): \*\***Name**: vp\_trans1 \*\***Ethernet Ports**: trans1 \*\***VLAN name**: vlan\_753 \*\***VLAN id**: 753 \*Create [trans1 IP Address](https://github.com/telcobridges-main/tmedia-wiki/tree/main/tmedia/configuration/configuring-ip-interfaces/README.md): \*\***Name**: trans1 \*\***Service to use**: RTP \*\***Host VLAN**: vp\_trans1:vlan\_753 \*\***IP address**: 192.168.153.1 \*\***Netmask**: 255.255.255.0 | | | Add transcoding unit | | | | | | \*Show [transcoding unit](https://github.com/telcobridges-main/tmedia-wiki/tree/main/tmedia/configuration/show-the-hardware-units-menu/README.md) \*Add [TB002177 transcoding unit](https://github.com/telcobridges-main/tmedia-wiki/tree/main/tmedia/configuration/adding-transcoding-unit/README.md) == Transcoding unit network configuration == | | Configure IP Network for voip0 | Configure IP Network for voip1 | | | \*Modify [voip0 virtual port](https://github.com/telcobridges-main/tmedia-wiki/tree/main/tmedia/configuration/configuring-a-virtual-port/README.md): \*\***Name**: voip0 \*\***Untagged**: unselect \*\***VLAN id**: 752 \*Modify [voip0 IP Address](https://github.com/telcobridges-main/tmedia-wiki/tree/main/tmedia/configuration/configuring-voip-interfaces/README.md): \*\***Interface Name**: voip0 \*\***Service to use**: RTP \*\***Virtual port**: TB002177:voip0 \*\***IP address**: 192.168.152.10 \*\***Netmask**: 255.255.255.0 | \*Modify [voip1 virtual port](https://github.com/telcobridges-main/tmedia-wiki/tree/main/tmedia/configuration/configuring-a-virtual-port/README.md): \*\***Name**: voip1 \*\***Untagged**: unselect \*\***VLAN id**: 753 \*Modify [voip1 IP Address](https://github.com/telcobridges-main/tmedia-wiki/tree/main/tmedia/configuration/configuring-voip-interfaces/README.md): \*\***Interface Name**: voip1 \*\***Service to use**: RTP \*\***Virtual port**: TB002177:voip1 \*\***IP address**: 192.168.153.10 \*\***Netmask**: 255.255.255.0 | | | | | Configure SIP | | | | | | \*[Configure SIP](https://github.com/telcobridges-main/tmedia-wiki/tree/main/tmedia/configuration/freesbc-web-portal-3-0-protocol-stacks/README.md) \*\* For WAN0 \*\*\*RTP port ranges parameters: \*\*\*\***Name**: pr\_wan0 \*\*\*\***IP Interface**: vlan\_1650:wan0 \*\*\*\***RTP Port min**: 20000 \*\*\*\***RTP Port max**: 40000 \*\*\*SIP transport server parameters: \*\*\*\***Name**: ts\_wan0 \*\*\*\***Port**: 5060 \*\*\*\***IP Interface**: vlan\_1650:wan0 \*\*\*SIP NAP parameters: \*\*\*\***Name**: nap\_sip\_wan0 \*\*\*\***Proxy Address**: 192.168.150.10 \*\*\*\***Port Range**: vlan\_1650:wan0:pr\_wan0:20000-40000 \*\*\*\***SIP Transport Servers**: ts\_wan0 \*\* For LAN0 \*\*\*RTP port ranges parameters: \*\*\*\***Name**: pr\_lan0 \*\*\*\***IP Interface**: vlan\_1651:lan0 \*\*\*\***RTP Port min**: 20000 \*\*\*\***RTP Port max**: 40000 \*\*\*SIP transport server parameters: \*\*\*\***Name**: ts\_lan0 \*\*\*\***Port**: 5060 \*\*\*\***IP Interface**: vlan\_1651:lan0 \*\*\*SIP NAP parameters: \*\*\*\***Name**: nap\_sip\_lan0 \*\*\*\***Proxy Address**: 192.168.151.10 \*\*\*\***Port Range**: vlan\_1651:lan0:pr\_lan0:20000-40000 \*\*\*\***SIP Transport Servers**: ts\_lan0 | | | | | --- # Agent Instructions This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com. ## Querying This Documentation If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question. Perform an HTTP GET request on the current page URL with the `ask` query parameter, and the optional `goal` query parameter: ``` GET https://prosbcdocs.telcobridges.com/tmedia-documentation/use-cases/ip-transcoding-unit-configuration-use-case-two-subnet-two-ip-addresses-tagged.md?ask=&goal= ``` `ask` is the immediate question: it should be specific, self-contained, and written in natural language. `goal` is optional and describes the broader end goal you are ultimately trying to accomplish on behalf of the user. GitBook uses it to tailor the answer towards what is most useful for that goal. The response will contain a direct answer to the question and relevant excerpts and sources from the documentation. Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.