Creating a SIP Transport Server

Step-by-step: adding a SIP transport server to a SIP stack in the web portal, and choosing the transport protocol it will carry signalling over. SBC 3.1 and 3.3.

Applies to: SBC 3.1, 3.3

After you create a SIP stack, you must must create a new SIP transport server for your SIP configuration.

Note: In order to employ SIP transport servers, the protocol that they will use to transport the SIP signaling traffic must be defined.

To create a SIP Transport server:

1- Click SIP in the navigation panel

SIP NavigationMenu

2- Select a SIP stack for which you wish to create a transport server

Select SIP

3- Click Create New Transport Server

Create New SIP TransportServer

4- Create the new SIP transport server:

• Enter a name for the server

• Select an appropriate port type

• Select an appropriate host IP interface

• Click Create

Create New SIP TransportServer1

5- Verify that the "SIP transport server was successfully created" message appears, and that the new server is listed in the Transport Servers list

Create New SIP TransportServer2

Create New SIP TransportServer3

List of Parameters

• Name

• Port Type

• Port

• IP Interface