Ctrlk
ProSBC ProductLearning CenterHelptelcobridges.com
For the complete documentation index, see llms.txt. This page is also available as Markdown.

Creating an M3UA Peer Signaling Process (IPSP)

Applies to: Tmedia 3.0, 3.2, 3.3

After you create an M3UA user part, you must create a new M3UA peer signaling process (PSP). This is used to describe a remote IPSP that is accessible through the M3UA system.

To create an M3UA Peer Signalling Process (PSP) on IPSP:

1- Click M3UA in the navigation panel:

CreateM3ua 0

2- Select an M3ua Network:

SelectM3uaNetwork A 0

3- Click Create New M3ua Peer Signaling Process in the M3UA network configuration window:

Create M3UA PSP 0

4- Configure the new M3UA PSP:

  • Enter a name for the PSP

  • Select IP Server Process (IPSP) as the PSP type

  • Enter a destination port (as configured in the destination element)

  • Click Create

Create M3UA PSP 1

5- Verify that the "M3ua PSP was successfully created" message appears

Create M3UA PSP 2

6- Associate a SAP with the new PSP:

  • Select a SAP from the list of available SAPs

  • Click the "<<" button to associate it with the PSP

Create M3UA PSP 3

7- Enter a destination address for the PSP:

  • Enter a destination address

  • Click "<<" to add the destination address to the PSP

Create M3UA PSP 4

8- Verify that the "(your address) was successfully added" message appears

Create M3UA PSP 5

Path

Parameters (text)

Parameters (json)

List of Parameters

PreviousCreating an M3UA Peer Signaling Process (ASP)
NextCreating an M3UA Peer Signalling Process

Last updated

Was this helpful?