Ctrlk
ProSBC ProductLearning CenterHelptelcobridges.com
For the complete documentation index, see llms.txt. This page is also available as Markdown.

Creating an M3UA Peer Server

Applies to: Tmedia 3.0, 3.2, 3.3

After you create an M3UA peer signaling process (PSP), you must create a new peer server. A peer server is a logical entity on the IP network that is served by one or more PSPs.

To create an M3UA peer server:

1- Click M3UA in the navigation panel:

CreateM3ua 0

2- Select an M3ua Network:

SelectM3uaNetwork A 0

3- Click Create New M3ua Peer Server in the M3UA network configuration window

Create M3UA Peer Server SGP 0

4- Configure the new M3UA peer server:

  • Enter a name for the peer server

  • Create a remote Peer Server (PSRV) with a Routing Context (RC) value representing the remote side； Take the RC value from ASP configuration. '''Note''':

    1. For SG/ASP, it is mandatory that this value is the same as the ASP local PSRV RC value.

    2. SG only uses remote peer servers, so a local peer server (OPC) is NOT needed.

  • Select the Traffic Mode Type. For remote peer server, this field is used in ASPAC.

  • Click Create

Create M3UA Peer Server SGP 1

5- Verify that the "M3ua Peer server was successfully created" message appears

Create M3UA Peer Server SGP 2

6- Associate the newly created peer server with a peer signaling process (PSP):

  • Select a PSP from the list of available PSPs

  • Click the "<<" button to associate the PSP with the peer server

Create M3UA Peer Server SGP 3

Path

Parameters (text)

Parameters (json)

List of Parameters

PreviousCreating an M3UA Network (SGP)
NextCreating an M3UA Peer Server (ASP)

Last updated

Was this helpful?