> For the complete documentation index, see [llms.txt](https://prosbcdocs.telcobridges.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://prosbcdocs.telcobridges.com/tmedia-documentation/other-pages/use-cases/ip-network-configuration-use-case-management-on-eth0-eth1-h-248-sigtran-rtp-on-voip0-voip1-bonded.md).

# IP Network Configuration Use Case:Management on eth0/eth1, H.248 + Sigtran, RTP on voip0/voip1 (bonded)

> **Applies to:** Tmedia 2.8, 2.9, 2.10, 3.0, 3.2

### Three VLAN: VLAN 100 for management on bonded eth0/eth1, VLAN 200 for Sigtran and H.248, VLAN 300 for RTP on bonded voip0/voip1 ports

![UseCase maneth h248 sig RTP](https://docs.telcobridges.com/w/images/a/a5/UseCase_maneth_h248_sig_RTP.png)

|                                                                                                                                                                                                                                                                                                   | Configure IP Network A                                                                                                                                                                                                                                                                              | Configure IP Network B                                                                                                                                                                                                                                                                              | Configure IP Network C | Configure IP Network D |
| ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ---------------------- | ---------------------- |
| Vlan 100 bonded over eth0 and eth1 ports \*[Create Virtual Port](/tmedia-documentation/configuration/web-portal-3-3/hardware/ip-network/configuring-virtual-port.md) \*[Create IP Address](/tmedia-documentation/configuration/web-portal-3-3/hardware/ip-network/configuring-voip-interfaces.md) | Vlan 200 bonded over VOIP0 and VOIP1 ports \*[Create Virtual Port](/tmedia-documentation/configuration/web-portal-3-3/hardware/ip-network/configuring-virtual-port.md) \*[Create IP Address](/tmedia-documentation/configuration/web-portal-3-3/hardware/ip-network/configuring-voip-interfaces.md) | Vlan 300 bonded over VOIP0 and VOIP1 ports \*[Create Virtual Port](/tmedia-documentation/configuration/web-portal-3-3/hardware/ip-network/configuring-virtual-port.md) \*[Create IP Address](/tmedia-documentation/configuration/web-portal-3-3/hardware/ip-network/configuring-voip-interfaces.md) |                        |                        |
| Configure RTP                                                                                                                                                                                                                                                                                     | Configure SIGTRAN                                                                                                                                                                                                                                                                                   | Configure H.248                                                                                                                                                                                                                                                                                     |                        |                        |
| \*[Configure SIGTRAN](/tmedia-documentation/configuration/web-portal-3-3/protocol-stack.md) Use virtual port with vlan 200                                                                                                                                                                        | \*[Configure RTP NAP](/tmedia-documentation/configuration/web-portal-3-3/protocol-stack/h-248-megaco/allocating-a-voip-network-access-point-nap.md) Use RTP port range created with vlan 300                                                                                                        | \*[Configure H.248](/tmedia-documentation/configuration/web-portal-3-3/protocol-stack.md) Use virtual port with vlan 200                                                                                                                                                                            |                        |                        |

### Sample Configuration

![4D Virtual port configuration 1](https://docs.telcobridges.com/w/images/7/71/4D_Virtual_port_configuration_1.png) ![4D IP Interface configuration 1](https://docs.telcobridges.com/w/images/f/f3/4D_IP_Interface_configuration_1.png)


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://prosbcdocs.telcobridges.com/tmedia-documentation/other-pages/use-cases/ip-network-configuration-use-case-management-on-eth0-eth1-h-248-sigtran-rtp-on-voip0-voip1-bonded.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.