> For the complete documentation index, see [llms.txt](https://prosbcdocs.telcobridges.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://prosbcdocs.telcobridges.com/tmedia-documentation/configuration/web-portal-3-3/protocol-stack/ss7-isup/creating-an-m3ua-peer-server-sgp.md).

# Creating an M3UA Peer Server (SGP)

> **Applies to:** Tmedia 3.0, 3.2, 3.3

After you create an M3UA peer signaling process, you must create a new M3UA peer server. A peer server is a logical entity on the IP network that is served by one or more PSPs.

To create an M3UA Peer Server:

1- Click **M3UA** in the navigation panel:

![CreateM3ua 0](https://docs.telcobridges.com/w/images/7/7b/CreateM3ua_0.png)

2- Select an M3ua Network:

![SelectNetwork SGP 0](https://docs.telcobridges.com/w/images/2/2e/SelectNetwork_SGP_0.png)

3- Click **Create New M3ua Peer Server** in the M3UA network configuration window:

![Create M3UA Peer Server SGP 0](https://docs.telcobridges.com/w/images/9/91/Create_M3UA_Peer_Server_SGP_0.png)

4- Configure the new M3UA Server:

* Enter a **name** for the peer server
* Create a remote Peer Server (PSRV) with a Routing Context (RC) value representing the remote side； Take the RC value from ASP configuration. '''Note''':
  1. For SG/ASP this value is mandatory to be the same as the ASP local PSRV RC value
  2. SG uses only remote peer servers, so local peer server (OPC) is NOT needed
* Select the **Traffic Mode Type**. For remote peer server, this field is used in **ASPAC**.
* Click **Create**

![Create M3UA Peer Server SGP 1](https://docs.telcobridges.com/w/images/e/e0/Create_M3UA_Peer_Server_SGP_1.png)

5- Verify that the **"M3ua Peer Server was successfully created"** message appears

![Create M3UA Peer Server SGP 2](https://docs.telcobridges.com/w/images/4/4a/Create_M3UA_Peer_Server_SGP_2.png)

6- Associate the newly created peer server with a peer signaling process (PSP):

* Select a **PSP** from the list of available PSPs
* Click the **"<<"** button to associate the PSP with the peer server

![Create M3UA Peer Server SGP 3](https://docs.telcobridges.com/w/images/5/59/Create_M3UA_Peer_Server_SGP_3.png)

**Path**

```
/configurations/@[configuration_name]/m3ua_stacks/@[m3ua_name]/m3ua_networks/@[m3ua_network]/m3ua_psrvs/@[m3ua_peer_server]
```

**Parameters (text)**

```
/configurations/@[configuration_name]/m3ua_stacks/@[m3ua_name]/m3ua_networks/@[m3ua_network]/m3ua_psrvs/@[m3ua_peer_server]
local               = false
m3ua_psps           = [ "@[m3ua_psp]" ]
name                = "@[m3ua_peer_server]"
routing_ctx         = 0
traffic_mode        = "Active-Standby"

/configurations/@[configuration_name]/m3ua_stacks/M3UA/@[m3ua_name]_networks/@[m3ua_network]/m3ua_psrvs/@[m3ua_peer_server]/advanced_parameters
load_sharing_mode                    = "SLS"
minimum_active_psps_for_load_sharing = 1
req_available                        = false
```

**Parameters (json)**

```
{
  "advanced_parameters" : {
    "load_sharing_mode" : "SLS",
    "minimum_active_psps_for_load_sharing" : 1,
    "req_available" : false
  },
  "local" : false,
  "m3ua_psps" : [
    "@[m3ua_psp]"
  ],
  "name" : "@[m3ua_peer_server]",
  "routing_ctx" : 0,
  "traffic_mode" : "Active-Standby"
}
```

### List of Parameters

* [Name](https://prosbcdocs.telcobridges.com/telecom-references/parameter-reference/m3ua#n)
* [Local](https://prosbcdocs.telcobridges.com/telecom-references/parameter-reference/m3ua#l)
* [Routing Context (RC)](https://prosbcdocs.telcobridges.com/telecom-references/parameter-reference/m3ua#r)
* [Traffic Mode Type](https://prosbcdocs.telcobridges.com/telecom-references/parameter-reference/m3ua#t)

**Advanced Parameters**

* [Load Sharing Mode](https://prosbcdocs.telcobridges.com/telecom-references/parameter-reference/m3ua#l)
* [Required Available](https://prosbcdocs.telcobridges.com/telecom-references/parameter-reference/m3ua#r)
* [Minimum Active Psps for load sharing](https://prosbcdocs.telcobridges.com/telecom-references/parameter-reference/m3ua#m)


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://prosbcdocs.telcobridges.com/tmedia-documentation/configuration/web-portal-3-3/protocol-stack/ss7-isup/creating-an-m3ua-peer-server-sgp.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.