> For the complete documentation index, see [llms.txt](https://prosbcdocs.telcobridges.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://prosbcdocs.telcobridges.com/tmedia-documentation/configuration/web-portal-3-3/protocol-stack/ss7-isup/creating-an-m3ua-configuration-ipsp.md).

# Creating an M3UA Configuration (IPSP)

> **Applies to:** Tmedia 3.0, 3.2, 3.3

To set up your M3UA system on an IP server process (IPSP), you must first create a new M3UA configuration. In this configuration the SS7 MTP2 and MTP3 layers are replaced entirely by the SIGTRAN M3UA layer. This system is typically set up on two IP signaling points.

To create an M3UA configuration on IPSP:

1- Click **M3UA** in the navigation panel:

![CreateM3ua 0](https://docs.telcobridges.com/w/images/7/7b/CreateM3ua_0.png)

2- Configure the M3UA service for IPSP:

* Enter a **name** for the configuration
* Select **IP Server Process (IPSP)** as the node type
* Click **Create**

![CreateM3ua 1](https://docs.telcobridges.com/w/images/6/66/CreateM3ua_1.png)

3- Verify that the **"M3ua Cfg was successfully created"** message appears

![CreateM3ua 2](https://docs.telcobridges.com/w/images/5/59/CreateM3ua_2.png)

**Path**

```
/configurations/@[configuration_name]/m3ua_stacks/@[m3ua_name]
```

**Parameters (text)**

```
/configurations/@[configuration_name]/m3ua_stacks/@[m3ua_name]
enabled             = false
name                = "@[m3ua_name]"
node_type           = "IP Server Process (IPSP)"

/configurations/@[configuration_name]/m3ua_stacks/@[m3ua_name]/advanced_parameters
as_pending_timer               = "5 seconds"
asp_down_timer                 = "2 seconds"
asp_msg_timer                  = "2 seconds"
asp_up_timer                   = "2 seconds"
cong_level_1                   = 500
cong_level_2                   = 600
cong_level_3                   = 750
daud_timer                     = "2 seconds"
destination_restrict_supported = false
drkm_nb_msg                    = 3
drkm_timer                     = "2 seconds"
duna_settle_timer              = "1 second"
heartbeat_timer                = ""
mtp3_status_timer              = "5 seconds"
only_one_hardware_unit_active  = false
restart_timer                  = "10 seconds"
seq_control_timer              = "1 second"
```

**Parameters (json)**

```
{
  "advanced_parameters" : {
    "as_pending_timer" : "5 seconds",
    "asp_down_timer" : "2 seconds",
    "asp_msg_timer" : "2 seconds",
    "asp_up_timer" : "2 seconds",
    "cong_level_1" : 500,
    "cong_level_2" : 600,
    "cong_level_3" : 750,
    "daud_timer" : "2 seconds",
    "destination_restrict_supported" : false,
    "drkm_nb_msg" : 3,
    "drkm_timer" : "2 seconds",
    "duna_settle_timer" : "1 second",
    "heartbeat_timer" : "",
    "mtp3_status_timer" : "5 seconds",
    "only_one_hardware_unit_active" : false,
    "restart_timer" : "10 seconds",
    "seq_control_timer" : "1 second"
  },
  "enabled" : false,
  "name" : "@[m3ua_name]",
  "node_type" : "IP Server Process (IPSP)"
}
```

### List of Parameters

* [Name](https://prosbcdocs.telcobridges.com/telecom-references/parameter-reference/m3ua#n)
* [Node Type](https://prosbcdocs.telcobridges.com/telecom-references/parameter-reference/m3ua#n)


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://prosbcdocs.telcobridges.com/tmedia-documentation/configuration/web-portal-3-3/protocol-stack/ss7-isup/creating-an-m3ua-configuration-ipsp.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.