> For the complete documentation index, see [llms.txt](https://prosbcdocs.telcobridges.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://prosbcdocs.telcobridges.com/tmedia-documentation/configuration/web-portal-3-3/hardware/tdm-network/creating-a-line-interface.md).

# Creating a Line Interface

> **Applies to:** Tmedia 3.0, 3.2, 3.3

Line interface is a generic term for TDM physical interfaces. TelcoBridges products support 3 types of physical interfaces:

* [T1/E1/J1 interfaces](https://prosbcdocs.telcobridges.com/telecom-references/transmission-and-lines/t1-e1-and-j1-interfaces)
* [DS3 interfaces](https://prosbcdocs.telcobridges.com/telecom-references/transmission-and-lines/ds3-interfaces)
* [SONET/SDH interfaces](https://prosbcdocs.telcobridges.com/telecom-references/transmission-and-lines/sonet-sdh-interfaces)

To create line interface(s):

1- Select **TDM Line Interfaces** from the navigation panel

![CreateLineInterface 0 A](https://docs.telcobridges.com/w/images/c/cb/CreateLineInterface_0_A.png)

2- You can create one line interface at a time or multiple line interfaces in a single pass.

2a- To create a single line interface, click **Create New Line Interface**.

![CreateLineInterface 1 A](https://docs.telcobridges.com/w/images/0/0e/CreateLineInterface_1_A.png)

2b- To create a range of line interfaces, click **Create Multiple Line Interfaces**.

![CreateMultipleLineInterface 0 A](https://docs.telcobridges.com/w/images/6/61/CreateMultipleLineInterface_0_A.png)

3- Enter values for the line interface.

3a- Single line interface

* Enter a **name** for the interface
* Set a **type** for the interface
* Set a **local index** for the line
* Select a **length** and an **encoding scheme**
* Click **Create**

![CreateLineInterface 2 A](https://docs.telcobridges.com/w/images/7/72/CreateLineInterface_2_A.png)

3b-Multiple line interfaces

* Set a **type** for the interface
* Enter a **name** for the range of interfaces. (In this example 'SeriesA' is prefixed to the name)
* Enter the number of line interfaces you wish to create.
* Set an **index** for the first line.
* Select a **length** and an **encoding scheme**
* Click **Create**

![CreateMultipleLineInterface 1 A](https://docs.telcobridges.com/w/images/b/bd/CreateMultipleLineInterface_1_A.png)

4- Verify that the **"Line interface was successfully created"** message is displayed

![CreateLineInterface 3 A](https://docs.telcobridges.com/w/images/4/4a/CreateLineInterface_3_A.png)

**Path**

```
/configurations/@[configuration_name]/hardware_units/@[hardware_name]/tdm_line_interfaces/@[line_interface_name]
```

**Parameters (text)**

```
/configurations/@[configuration_name]/hardware_units/@[hardware_name]/tdm_line_interfaces/@[line_interface_name]
local_index   = 0
name          = "@[line_interface_name]"
type          = "T1"

/configurations/@[configuration_name]/hardware_units/@[hardware_name]/tdm_line_interfaces/@[line_interface_name]/state
loopback_type = "None"
tx_state      = "TX on"

/configurations/@[configuration_name]/hardware_units/@[hardware_name]/tdm_line_interfaces/@[line_interface_name]/t1_parameters
encoding     = "B8ZS"
length       = "Short"
signal_level = "2"
```

**Parameters (json)**

```
{
  "local_index" : 0,
  "name" : "LI_T1_00",
  "state" : {
    "loopback_type" : "None",
    "tx_state" : "TX on"
  },
  "t1_parameters" : {
    "encoding" : "B8ZS",
    "length" : "Short",
    "signal_level" : "2"
  },
  "type" : "T1",
  "line_services" : {
  }
}
```

### List of Parameters

* [Name](https://prosbcdocs.telcobridges.com/telecom-references/parameter-reference/m3ua#n)
* [Type](https://prosbcdocs.telcobridges.com/telecom-references/parameter-reference/tdm#t)
* [Local Index](https://prosbcdocs.telcobridges.com/telecom-references/parameter-reference/tdm#l)
* [Length](https://prosbcdocs.telcobridges.com/telecom-references/parameter-reference/tdm#l)
* [Encoding](https://prosbcdocs.telcobridges.com/telecom-references/parameter-reference/tdm#e)

**Advanced Parameters**

* [Signal Level](https://prosbcdocs.telcobridges.com/telecom-references/parameter-reference/tdm#s)


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://prosbcdocs.telcobridges.com/tmedia-documentation/configuration/web-portal-3-3/hardware/tdm-network/creating-a-line-interface.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.