Creating a 1+1 Group
Applies to: Tmedia 3.0, 3.2, 3.3
A 1+1 group identifies the two Tmedia hardware devices operating together to provide 1+1 backup protection. One device is identified as the primary hardware device, while the other device is identified as the backup hardware device. To create a 1+1 group, use the Tmedia Web Portal.
To create a 1+1 group:
1- Click 1+1 in the navigation panel
2- Click Create New 1+1 Group
3- Enter the serial numbers of the primary and 1+1 backup hardware devices.
Provide a name for the 1+1 group.
Select the serial number of the primary hardware device. (This field may already be filled.)
Select the serial number of the 1+1 backup hardware device.
Set Auto switch-back to cause an automatic switch back to the original primary hardware device when it becomes available. If the field is clear (not checked), then a switch back to the original device will occur only after a manual reboot of the system.
Click Create
4- Verify that the newly added 1+1 group appears in the 1+1 Groups list.
Path
Parameters (text)
Parameters (json)
List of Parameters
Last updated
Was this helpful?