For the complete documentation index, see llms.txt. This page is also available as Markdown.
Adding TMS Hardware
Applies to: Tmedia 3.0, 3.2, 3.3
When you receive a new system, at least one hardware configuration will have been set in the Toolpack application server, by default. To add a TMS hardware device to your system, use the Tmedia Web Portal.
Schematic showing 2 TMP6400 devices with an external server and a second machine with a web browser
To add one or more additional hardware devices to the Toolpack system configuration, their serial numbers must be registered with the Toolpack application server.
To add a hardware device:
1- Click Hardware Units in the navigation panel
TdmSwitch 0 A
2- Click Create New Unit, to add a new hardware device
TdmSwitch 1 A
3- Enter a name for the hardware device
Enter the serial number of the new hardware device (filling in the Serial Number field will cause auto-completion of the field to occur).
Select the appropriate hardware device from the Type field. (In this case select TMS)
Enter the location in which the hardware device is installed.
Enter a meaningful description for the use or purpose of the hardware device.
Select Enabled from the Target State field.
Click Create
TdmSwitch 2 A
4- Verify that the newly added hardware device appears in the TMS Units list.
