For the complete documentation index, see llms.txt. This page is also available as Markdown.

Configure Fax Passthrough

Applies to: Tmedia 3.0, 3.2, 3.3; SBC 3.1, 3.3

To enable passthrough:

  1. Select Profiles from the navigation menu.

ConfigureFaxPassthrough 0
  1. Click Create New Profile

ConfigureFaxPassthrough 1
  1. Enter a name for the Fax Profile.

  • Click Fax/Modem Relay to expand the view.

ConfigureFaxPassthrough 2 A
  1. Configure the settings:

  • Set Detection Mode to Standard.

  • Set Relay Mode to Passthrough.

  • Check the Switch to FAX relay upon CNG tone option.

  • Set Detection type to "Silence Suppression off"

  • Verify the Codec is the same as the remote end.

  • Click Create

ConfigureFaxPassthrough 3
  1. Verify that the Profile was successfully created message is displayed.

ConfigureFaxPassthrough 4
Northbound Interface

Path

Parameters (text)

Parameters (json)

Last updated

Was this helpful?