# Resetting the Network Device Role

Once the ProSBC is configured, it is possible add or change physical IP interfaces. To do so you must reset the network device role settings of the unit.\
Note: this will reallocate the main network controller and stop the service for a few minutes

To reset the network device role, do the following:

1- Click Hosts in the navigation panel.

<figure><img src="https://docs.telcobridges.com/w/images/f/f4/HostRoleReset_0_A.png" alt=""><figcaption></figcaption></figure>

\
2- Select the serial number of the unit.

<figure><img src="https://docs.telcobridges.com/w/images/4/4e/HostRoleReset_1_A.png" alt=""><figcaption></figcaption></figure>

\
3- Click the Status tab.

<figure><img src="https://docs.telcobridges.com/w/images/0/08/HostRoleReset_2_A.png" alt=""><figcaption></figcaption></figure>

\
4- In the Action drop down box select Change Network Devices Roles

* Click Apply Action

<figure><img src="https://docs.telcobridges.com/w/images/b/b7/Host_action_snapshot_network.png" alt=""><figcaption></figcaption></figure>


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://prosbcdocs.telcobridges.com/configuration-details/configuration-by-web-portal-category/system-settings/resetting-the-network-device-role.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.