# Call statistics available in CDR
| Field name | Description |
| :------------------------------------: | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| **Statistics** | |
| @{StatSummary} | Summary of the RTP and T.38 stats in a pre-defined format:
RTP( Rx(Pkt=2 CN=0 Signaling=0 Err=0) Tx(Pkt=0 CN=0 Signaling=0 Err=0)) T38( Rx(Pages=0 Pkt=0 Err=0) Tx(Pages=0 Pkt=0))
MOS(In=4.3 Out=4.3}) NetworkQuality(In=100 Out=100)
For customized format, use other variables below.
|
| **MOS statistics** | |
| @{Stat:MOS} | Summary of the MOS stats: (Codec;Ingress;Egress) |
| @{Stat:MOS:Codec} | Maximal MOS value for the audio codec used |
| @{Stat:MOS:Ingress} | Calculated MOS value using RTP RX statistics |
| @{Stat:MOS:Egress} | Calculated MOS value using RTCP statistics (available only when RTCP is enable) |
| @{Stat:MOS:Global} | Minimum value between MOS ingress and MOS egress |
| **Network quality statistics** | |
| @{Stat:NetworkQuality} | Summary of the network quality stats: (Ingress;Egress) |
| @{Stat:NetworkQuality:Ingress} | Calculated network quality percentage from 0 (bad) to 100 (perfect) for packets received |
| @{Stat:NetworkQuality:Egress} | Calculated network quality percentage from 0 (bad) to 100 (perfect) for packets transmitted (available only when RTCP is enable) |
| @{Stat:NetworkQuality:Global} | Minimum value between ingress and egress |
| **Receive statistics** | |
| @{Stat:Rtp:Rx} | Summary of the Rx stats: (Packets;CNPackets;SignalingPackets;Errors;MOS:Ingress) |
| @{Stat:Rtp:Rx:Packets} | Number of packets received from the IP network (audio + comfort noise + signaling) |
| @{Stat:Rtp:Rx:VoicePackets} | Number of voice (audio) packets received from the IP network |
| @{Stat:Rtp:Rx:VoiceBytes} | Number of payload bytes from voice (audio) packets received from the IP network |
| @{Stat:Rtp:Rx:CNPackets} | Number of comfort noise packets received from the IP network |
| @{Stat:Rtp:Rx:SignalingPackets} | Number of signaling packets (like "Telephony events") received from the IP network |
| @{Stat:Rtp:Rx:IPPackets} | Number of packets received from the IP network |
| @{Stat:Rtp:Rx:IPBytes} | Number of bytes received from the IP network |
| @{Stat:Rtp:Rx:RFC2833Tones} | Number of RFC2833 tones received from the IP network, and played back to TDM |
| @{Stat:Rtp:Rx:RedundantPackets} | Number of redundant packets received from the IP network (same sequence number received more than once) |
| @{Stat:Rtp:Rx:MeanPower} | Mean audio power (from IP to TDM direction), in dBov (0 the loudest, negative is softer level). Available only for calls with Echo cancellation enabled, thus only TDM<->IP calls. |
| @{Stat:Rtp:Rx:VoiceDuration} | Duration (in seconds) of voice (audio), from IP to TDM direction |
| @{Stat:Rtp:Rx:PlayoutDelay} | Current IP to TDM audio delay in millisecond (adaptive jitter buffer delay) |
| @{Stat:Rtp:Rx:MaxPlayoutDelay} | Maximum (for the whole call) IP to TDM audio delay in millisecond (adaptive jitter buffer delay) |
| @{Stat:Rtp:Rx:SsrcChanges} | Number of changes of "SSRC" RTP header value (counting initial SSRC received as one) |
| @{Stat:Rtp:Rx:Concealments} | Number of times decoder made audio concealment to preserve audio continuity (frequent upon first packet of a call, or after RFC2833 tones) |
| @{Stat:Rtp:Rx:Echo:ERLLevel} | Attenuation of a signal from the received-out port to the send-in port of an echo canceller |
| @{Stat:Rtp:Rx:Error:BufOverflows} | Number of packets dropped due to jitter buffer adaptation (to keep play-out delay low) |
| @{Stat:Rtp:Rx:Error:SeqErrors} | Number of sequence errors detected among packets received from the IP network |
| @{Stat:Rtp:Rx:Error:BadPackets} | Number of packets received with invalid header, or other error preventing proper audio decoding |
| @{Stat:Rtp:Rx:Error:RFC2833BadPackets: | Number of RFC2833 signaling packets that could not be properly decoded |
| @{Stat:Rtp:Rx:Error:LatePackets} | Number of packets that arrived after the moment they should have started to be played-out to TDM |
| @{Stat:Rtp:Rx:Error:LostPackets} | Number of packets considered "lost" (never received for play-out to TDM) |
| @{Stat:Rtp:Rx:Errors} | Total of all "Rtp:Rx:Error:" statistics above |
| **Transmit statistics** | |
| @{Stat:Rtp:Tx} | Summary of the Tx stats: (Packets;CNPackets;SignalingPackets;Errors;MOS:Egress) |
| @{Stat:Rtp:Tx:Packets} | Number of packets sent to the IP network (audio + comfort noise + signaling) |
| @{Stat:Rtp:Tx:VoicePackets} | Number of voice (audio) packets sent to the IP network |
| @{Stat:Rtp:Tx:CNPackets} | Number of comfort noise packets sent to the IP network |
| @{Stat:Rtp:Tx:SignalingPackets} | Number of signaling packets (like "Telephony events") sent to the IP network |
| @{Stat:Rtp:Tx:IPPackets} | Number of packets sent to the IP network |
| @{Stat:Rtp:Tx:IPBytes} | Number of bytes sent to the IP network |
| @{Stat:Rtp:Tx:RFC2833Tones} | Number of RFC2833 tones sent to the IP network (relaying corresponding detected TDM tones) |
| @{Stat:Rtp:Tx:MeanPower} | Mean audio power (from TDM to IP direction), in dBov (0 the loudest, negative is softer level). Available only for calls with Echo cancellation enabled, thus only TDM<->IP calls. |
| @{Stat:Rtp:Tx:VoiceDuration} | Duration (in seconds) of voice (audio), from TDM to IP direction |
| @{Stat:Rtp:Tx:Echo:ACOMLevel} | Attenuation of a signal from the receive-out port to the send-out port of an echo canceller |
| @{Stat:Rtp:Tx:Error:LostPackets} | Number of packets considered "lost" by remote side (only available if RTCP is used) |
| @{Stat:Rtp:Tx:Error:ArpFailure} | Number of failures to ARP remote IP address to send RTP packets to (preventing sending any packets) |
| @{Stat:Rtp:Tx:Errors} | Total of all "Rtp:Tx:Error:" statistics above |
| **RTCP statistics** | **(only if RTCP is enabled on the profile)** |
| @{Stat:Rtcp} | Summary of the Rtcp stats: (Packets;LostPackets;Jitter) |
| @{Stat:Rtcp:Packets} | Number of packets reported as received by remote equipment |
| @{Stat:Rtcp:LostPackets} | Number of packets reported as lost by remote equipment |
| @{Stat:Rtcp:Jitter} | Inter-packet interval jitter, in millisecond |
| @{Stat:Rtcp:RoundTripDelay} | Round-trip delay in milliseconds. Requires extended RTCP (XRTCP) to be enabled. |
| **T38 statistics** | |
| @{Stat:T38:StateChanges} | Number of T.38 state changes, through T.30 negotiation between FAX machines |
| @{Stat:T38:Rx | Summary of the T.38 Rx stats: (Pages;Packets;Errors) |
| @{Stat:T38:Rx:Pages} | Number of FAX pages received from T.38 packets from the IP network |
| @{Stat:T38:Rx:Packets} | Number of T.38 packets received from the IP network |
| @{Stat:T38:Rx:Bytes} | Number of T.38 payload bytes from T.38 packets received from the IP network |
| @{Stat:T38:Rx:Duration} | Duration of the T.38 session from IP to TDM |
| @{Stat:T38:Rx:PlayoutDelay} | Current IP to TDM audio delay in millisecond (re-modulation and jitter buffer delay) |
| @{Stat:T38:Rx:MaxPlayoutDelay} | Maximum IP to TDM audio delay in millisecond (re-modulation and jitter buffer delay) |
| @{Stat:T38:Rx:Error:BufOverflows} | Number of packets dropped because "from IP" jitter buffer is full |
| @{Stat:T38:Rx:Error:BufUnderflows} | Number of times T.38 re-modulation to TDM had no data (received from IP) to re-modulate |
| @{Stat:T38:Rx:Error:SeqErrors} | Number of sequence errors detected among packets received from the IP network |
| @{Stat:T38:Rx:Error:BadPackets} | Number of packets received with invalid header, or other error preventing proper audio decoding |
| @{Stat:T38:Rx:Errors} | Total of all "T38:Rx:Error:" statistics above |
| @{Stat:T38:Tx} | Summary of the T.38 Tx stats: (Pages;Packets) |
| @{Stat:T38:Tx:Pages} | Number of FAX pages received from TDM, sent to T.38 packets to the IP network |
| @{Stat:T38:Tx:Packets} | Number of T.38 packets sent to the IP network |
| @{Stat:T38:Tx:Bytes} | Number of T.38 payload bytes from T.38 packets sent to the IP network |
| @{Stat:T38:Tx:Duration} | Duration of the T.38 session from TDM to IP |
| @{Stat:T38:FromTdm:MeanPower} | Mean audio power received from TDM side, in dBov (0 the loudest, negative is softer level) |
| Field name | Description |
| ------------------------------------------------ | ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| Receive statistics | |
| @{ErrorSummary} | Summary of reported leg errors in a pre-defined format:
FromNetwork(NoPackets;ExcessivePackets;ExcessivePayloadTypeChanges;ExcessiveIpPortChanges;ExcessiveSsrcChanges) ToNetwork(NoPackets)
For customized format, use other variables below.
|
| @{Error:FromNetwork} | Summary of the leg errors 'from network': (NoPackets;ExcessivePackets;ExcessivePayloadTypeChanges;ExcessiveIpPortChanges;ExcessiveSsrcChanges) |
| @{FromNetwork:NoPackets} | When '1', no packets received from the network in the last few seconds, while packets were expected. |
| @{Error:FromNetwork:ExcessivePayloadTypeChanges} | When '1', excessive payload type changes were detected in the last few seconds. Payload type changes will be ignored. Packets may be dropped. |
| @{Error:FromNetwork:ExcessiveIpPortChanges} | When '1', excessive remote IP/Port changes were detected in the last few seconds. Received packets will be dropped. |
| @{Error:FromNetwork:ExcessiveSsrcChanges} | When '1', excessive remote SSRC changes (SSRC field in RTP packets header) were detected in the last few seconds. Received packets will be dropped. |
| @{Error:FromNetwork:ExcessivePackets} | When '1', excessive packets/bytes rate was received from the network. All packets will be dropped. |
| @{Error:ToNetwork} | Summary of the leg errors 'tonetwork': (NoPackets) |
| @{Error:ToNetwork:NoPackets} | When '1', no packets were sent to network in the last few seconds, while we were supposed to send packets (remote IP not reachable?) |
---
# Agent Instructions: Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.
Perform an HTTP GET request on the current page URL with the `ask` query parameter:
```
GET https://prosbcdocs.telcobridges.com/configuration-details/configuration-by-web-portal-category/call-detail-records-cdr/cdr-variables/call-statistics-available-in-cdr.md?ask=
```
The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.
Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.